 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PDTA123T series PNP resistor-equipped transistors; R1 = 2.2 k, R2 = open Rev. 01 -- 7 March 2006 Product data sheet 1. Product profile 1.1 General description PNP Resistor-Equipped Transistors (RET) family. Table 1: Product overview Package Philips PDTA123TE PDTA123TK PDTA123TM PDTA123TS [1] PDTA123TT PDTA123TU [1] Type number NPN complement JEITA SC-75 SC-59A SC-101 SC-43A SC-70 JEDEC TO-236 TO-92 TO-236AB PDTC123TE PDTC123TK PDTC123TM PDTC123TS PDTC123TT PDTC123TU SOT416 SOT346 SOT883 SOT54 SOT23 SOT323 Also available in SOT54A and SOT54 variant packages (see Section 2). 1.2 Features s Built-in bias resistors s Simplifies circuit design s 100 mA output current capability s Reduces component count s Reduces pick and place costs 1.3 Applications s Digital applications s Controlling IC inputs s Cost-saving alternative for BC857 series in digital applications s Switching loads 1.4 Quick reference data Table 2: Symbol VCEO IO R1 Quick reference data Parameter collector-emitter voltage output current bias resistor 1 (input) Conditions open base Min 1.54 Typ 2.2 Max -50 -100 2.86 Unit V mA k Philips Semiconductors PDTA123T series PNP resistor-equipped transistors; R1 = 2.2 k, R2 = open 2. Pinning information Table 3: Pin SOT54 1 2 3 input (base) output (collector) GND (emitter) 1 2 3 001aab347 006aaa217 R1 Pinning Description Simplified outline Symbol 2 1 3 SOT54A 1 2 3 input (base) output (collector) GND (emitter) 1 2 3 001aab348 006aaa217 R1 2 1 3 SOT54 variant 1 2 3 input (base) output (collector) GND (emitter) 1 2 3 001aab447 006aaa217 R1 2 1 3 SOT23; SOT323; SOT346; SOT416 1 2 3 input (base) GND (emitter) output (collector) 1 1 2 006aaa144 sym009 3 R1 3 2 SOT883 1 2 3 input (base) GND (emitter) output (collector) 1 3 2 Transparent top view 1 R1 3 2 sym009 PDTA123T_SER_1 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 01 -- 7 March 2006 2 of 10 Philips Semiconductors PDTA123T series PNP resistor-equipped transistors; R1 = 2.2 k, R2 = open 3. Ordering information Table 4: Ordering information Package Name PDTA123TE PDTA123TK PDTA123TM PDTA123TS [1] PDTA123TT PDTA123TU [1] Type number Description plastic surface mounted package; 3 leads plastic surface mounted package; 3 leads leadless ultra small plastic package; 3 solder lands; body 1.0 x 0.6 x 0.5 mm plastic single-ended leaded (through hole) package; 3 leads plastic surface mounted package; 3 leads plastic surface mounted package; 3 leads Version SOT416 SOT346 SOT883 SOT54 SOT23 SOT323 SC-75 SC-59A SC-101 SC-43A SC-70 Also available in SOT54A and SOT54 variant packages (see Section 2 and Section 9). 4. Marking Table 5: Marking codes Marking code [1] 2A GA FA TA123T ZL* *1S Type number PDTA123TE PDTA123TK PDTA123TM PDTA123TS PDTA123TT PDTA123TU [1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China PDTA123T_SER_1 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 01 -- 7 March 2006 3 of 10 Philips Semiconductors PDTA123T series PNP resistor-equipped transistors; R1 = 2.2 k, R2 = open 5. Limiting values Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VCBO VCEO VEBO IO ICM Ptot Parameter collector-base voltage collector-emitter voltage emitter-base voltage output current peak collector current total power dissipation SOT416 SOT346 SOT883 SOT54 SOT23 SOT323 Tstg Tj Tamb [1] [2] [3] Conditions open emitter open base open collector single pulse; tp 1 ms Tamb 25 C [1] [1] [2] [3] [1] [1] [1] Min - Max -50 -50 -5 -100 -100 Unit V V V mA mA -65 -65 150 250 250 500 250 200 +150 150 +150 mW mW mW mW mW mW C C C storage temperature junction temperature ambient temperature Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. Reflow soldering is the only recommended soldering method. Device mounted on an FR4 PCB with 60 m copper strip line, standard footprint. 6. Thermal characteristics Table 7: Symbol Rth(j-a) Thermal characteristics Parameter thermal resistance from junction to ambient SOT416 SOT346 SOT883 SOT54 SOT23 SOT323 [1] [2] [3] Conditions in free air [1] [1] [2] [3] [1] [1] [1] Min Typ Max Unit - - 833 500 500 250 500 625 K/W K/W K/W K/W K/W K/W Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. Reflow soldering is the only recommended soldering method. Device mounted on an FR4 PCB with 60 m copper strip line, standard footprint. PDTA123T_SER_1 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 01 -- 7 March 2006 4 of 10 Philips Semiconductors PDTA123T series PNP resistor-equipped transistors; R1 = 2.2 k, R2 = open 7. Characteristics Table 8: Characteristics Tamb = 25 C unless otherwise specified. Symbol ICBO ICEO Parameter collector-base cut-off current Conditions VCB = -50 V; IE = 0 A Min 30 1.54 VCB = -10 V; IE = ie = 0 A; f = 1 MHz Typ 2.2 Max -100 -1 -50 -100 -150 2.86 3 mV k pF Unit nA A A nA collector-emitter cut-off VCE = -30 V; IB = 0 A current VCE = -30 V; IB = 0 A; Tj = 150 C emitter-base cut-off current DC current gain collector-emitter saturation voltage bias resistor 1 (input) collector capacitance VEB = -5 V; IC = 0 A VCE = -5 V; IC = -20 mA IC = -10 mA; IB = -0.5 mA IEBO hFE VCEsat R1 Cc 500 hFE 400 (1) 006aaa691 -1 006aaa692 VCEsat (V) 300 (2) -10-1 200 (3) (1) (2) (3) 100 0 -10-1 -1 -10 IC (mA) -102 -10-2 -10-1 -1 -10 IC (mA) -102 VCE = -5 V (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -40 C IC/IB = 20 (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -40 C Fig 1. DC current gain as a function of collector current; typical values Fig 2. Collector-emitter saturation voltage as a function of collector current; typical values PDTA123T_SER_1 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 01 -- 7 March 2006 5 of 10 Philips Semiconductors PDTA123T series PNP resistor-equipped transistors; R1 = 2.2 k, R2 = open 8. Package outline 1.8 1.4 3 0.45 0.15 0.95 0.60 3.1 2.7 3 0.6 0.2 1.3 1.0 1.75 0.9 1.45 0.7 3.0 1.7 2.5 1.3 1 2 0.30 0.15 1 0.25 0.10 04-11-04 1 2 0.50 0.35 0.26 0.10 04-11-11 1.9 Dimensions in mm Dimensions in mm Fig 3. Package outline SOT416 (SC-75) 0.62 0.55 0.55 0.47 0.30 0.22 3 Fig 4. Package outline SOT346 (SC-59A/TO-236) 0.50 0.46 4.2 3.6 0.45 0.38 0.65 0.30 0.22 0.20 0.12 0.35 Dimensions in mm 1.02 0.95 4.8 4.4 0.48 0.40 1 2 2.54 3 1.27 2 1 5.2 5.0 03-04-03 Dimensions in mm 14.5 12.7 04-11-16 Fig 5. Package outline SOT883 (SC-101) Fig 6. Package outline SOT54 (SC-43A/TO-92) 0.45 0.38 4.2 3.6 1.27 4.2 3.6 0.45 0.38 0.48 0.40 1 3 max 2.5 max 1 0.48 0.40 2 2.54 3 1.27 4.8 4.4 2 5.08 2.54 3 5.2 5.0 14.5 12.7 04-06-28 5.2 5.0 Dimensions in mm 14.5 12.7 4.8 4.4 Dimensions in mm 05-01-10 Fig 7. Package outline SOT54A PDTA123T_SER_1 Fig 8. Package outline SOT54 variant (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 01 -- 7 March 2006 6 of 10 Philips Semiconductors PDTA123T series PNP resistor-equipped transistors; R1 = 2.2 k, R2 = open 3.0 2.8 3 1.1 0.9 2.2 1.8 3 0.45 0.15 1.1 0.8 0.45 0.15 2.5 1.4 2.1 1.2 2.2 1.35 2.0 1.15 1 2 1 0.48 0.38 0.15 0.09 04-11-04 Dimensions in mm 2 0.4 0.3 1.3 04-11-04 0.25 0.10 1.9 Dimensions in mm Fig 9. Package outline SOT23 (TO-236AB) Fig 10. Package outline SOT323 (SC-70) 9. Packing information Table 9: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number PDTA123TE PDTA123TK PDTA123TM PDTA123TS Package SOT416 SOT346 SOT883 SOT54 SOT54A Description 4 mm pitch, 8 mm tape and reel 4 mm pitch, 8 mm tape and reel 2 mm pitch, 8 mm tape and reel bulk, straight leads tape and reel, wide pitch tape ammopack, wide pitch SOT54 variant bulk, delta pinning PDTA123TT PDTA123TU [1] Packing quantity 3000 -115 -115 -215 -115 5000 -412 -112 10000 -135 -135 -315 -116 -126 -235 -135 SOT23 SOT323 4 mm pitch, 8 mm tape and reel 4 mm pitch, 8 mm tape and reel For further information and the availability of packing methods, see Section 15. PDTA123T_SER_1 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 01 -- 7 March 2006 7 of 10 Philips Semiconductors PDTA123T series PNP resistor-equipped transistors; R1 = 2.2 k, R2 = open 10. Revision history Table 10: Revision history Release date 20060307 Data sheet status Product data sheet Change notice Doc. number Supersedes Document ID PDTA123T_SER_1 PDTA123T_SER_1 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 01 -- 7 March 2006 8 of 10 Philips Semiconductors PDTA123T series PNP resistor-equipped transistors; R1 = 2.2 k, R2 = open 11. Data sheet status Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). III Product data Production [1] [2] [3] Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 14. Trademarks Notice -- All referenced brands, product names, service names and trademarks are the property of their respective owners. 13. Disclaimers Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 15. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com PDTA123T_SER_1 (c) Koninklijke Philips Electronics N.V. 2006. All rights reserved. Product data sheet Rev. 01 -- 7 March 2006 9 of 10 Philips Semiconductors PDTA123T series PNP resistor-equipped transistors; R1 = 2.2 k, R2 = open 16. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information. . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 2 3 3 4 4 5 6 7 8 9 9 9 9 9 (c) Koninklijke Philips Electronics N.V. 2006 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 7 March 2006 Document number: PDTA123T_SER_1 Published in The Netherlands |
Price & Availability of PDTA123T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |